Merge branch 'master' of github.com:dylanaraps/neofetch

* Add pacstall to package managers

https://github.com/pacstall/pacstall

* Fix indents on Pacstall

* Fix tabbing

again

.github/ISSUE_TEMPLATE.md

@@ -2,6 +2,8 @@
 
 If you're suggesting a new feature then just a description will suffice.
 
+- [ ] Does this issue still occur in the master branch? (**Required if issue**)
+
 
 #### Neofetch version
 

.travis.yml

@@ -11,12 +11,6 @@ before_install:
 
 script:
     - time ./neofetch --travis -v
-    # See this wiki page for why we're disabling these errors.
-    # https://github.com/dylanaraps/neofetch/wiki/Shellcheck-Exclusions
-    - if [[ "$TRAVIS_OS_NAME" == "linux" ]]; then shellcheck neofetch -e SC1090,SC2009,SC2012,SC2016,SC2034,SC2128,SC2153,SC2154,SC2178,SC2010,SC1004,SC1091,SC1117; fi
-    # The if statement is here to invert the exit code from grep.
-    # grep normally errors if no match is found but we want the opposite.
-    # We invert it so grep fails if a match is found.
+    - if [[ "$TRAVIS_OS_NAME" == "linux" ]]; then shellcheck -e SC2244 -e SC2243 neofetch; fi
     # Check for lines longer than 100 chars.
-    # There are 3 lines that must be longer than 100 chars.
-    - if (("$(grep '.\{101\}' neofetch | wc -l)" > 3)); then (exit 1); else (exit 0); fi
+    - if grep '.\{102\}' neofetch; then (exit 1); else (exit 0); fi

CONTRIBUTING.md

@@ -23,20 +23,15 @@
   and variable names.
 - Keep lines below `100` characters long.
 - Use `[[ ]]` for tests.
-- Double Quote **EVERYTHING**.
-- Don’t use single quotes, except for special cases.
+- Quote **EVERYTHING**.
 
 ### ShellCheck
 
 For your contribution to be accepted, your changes need to pass
 ShellCheck.
 
-Run ShellCheck with the following command:
-
 ```sh
-# Why do we exclude numerous tests?
-# See: https://github.com/dylanaraps/neofetch/wiki/Shellcheck-Exclusions
-shellcheck neofetch -e SC1090,SC2009,SC2012,SC2016,SC2034,SC2128,SC2153,SC2154,SC2178,SC2010,SC1004,SC1091,SC1117
+shellcheck neofetch
 ```
 
 **Note**: If you have trouble installing ShellCheck. You can open a pull
@@ -58,6 +53,8 @@ request on the repo and our Travis.ci hook will run ShellCheck for you.
     - Use `bash`'s built-in syntax (`file="$(< /path/to/file.txt)")`).
 - Don’t use `grep "pattern" | awk '{ printf }'`.
     - Use `awk '/pattern/ { printf }'`
+- Don’t use `wc`.
+    - Use `${#var}` or `${#arr[@]}`.
 
 
 ### If Statements

LICENSE.md

@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2016-2018 Dylan Araps
+Copyright (c) 2015-2021 Dylan Araps
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

Makefile

@@ -1,5 +1,5 @@
-PREFIX ?= /usr
-MANDIR ?= $(PREFIX)/share/man
+PREFIX = /usr
+MANDIR = $(PREFIX)/share/man
 
 all:
 	@echo Run \'make install\' to install Neofetch.

README.md

@@ -2,11 +2,9 @@
 <p align="center">A command-line system information tool written in bash 3.2+</p>
 
 <p align="center">
-<a href="https://discord.gg/BtnTPFF"><img src="https://img.shields.io/discord/440354555197128704.svg"></a>
-<a href="https://travis-ci.org/dylanaraps/neofetch"><img src="https://travis-ci.org/dylanaraps/neofetch.svg?branch=master"></a>
 <a href="./LICENSE.md"><img src="https://img.shields.io/badge/license-MIT-blue.svg"></a>
 <a href="https://github.com/dylanaraps/neofetch/releases"><img src="https://img.shields.io/github/release/dylanaraps/neofetch.svg"></a>
-<a href="https://www.patreon.com/dyla"><img src="https://img.shields.io/badge/donate-patreon-yellow.svg"></a>
+<a href="https://repology.org/metapackage/neofetch"><img src="https://repology.org/badge/tiny-repos/neofetch.svg" alt="Packaging status"></a>
 </p>
 
 <img src="https://i.imgur.com/GFmC5Ad.png" alt="neofetch" align="right" height="240px">
@@ -25,35 +23,3 @@ Neofetch supports almost 150 different operating systems. From Linux to Windows,
 
 
 ### More: \[[Dependencies](https://github.com/dylanaraps/neofetch/wiki/Dependencies)\] \[[Installation](https://github.com/dylanaraps/neofetch/wiki/Installation)\] \[[Wiki](https://github.com/dylanaraps/neofetch/wiki)\]
-
-## Articles
-
-- https://lamiradadelreplicante.com/2016/05/15/la-informacion-de-tu-sistema-en-la-terminal-con-neofetch/
-- https://linuxconfig.org/how-to-display-system-information-with-neofetch
-- https://www.2daygeek.com/neofetch-display-linux-systems-information-ascii-distribution-logo-terminal/
-- https://www.cyberciti.biz/howto/neofetch-awesome-system-info-bash-script-for-linux-unix-macos/
-- https://www.lffl.org/2016/11/neofetch-le-informazioni-sistema-sul-terminale-stile.html
-- https://www.maketecheasier.com/display-system-information-neofetch-linux/
-- https://www.omgubuntu.co.uk/2016/11/neofetch-terminal-system-info-app
-- https://www.omgubuntu.co.uk/2016/12/cli-system-tool-neofetch-2-0-released
-- https://www.omgubuntu.co.uk/2017/01/neofetch-3-0-released
-- https://www.ostechnix.com/neofetch-display-linux-systems-information/
-- https://www.techrepublic.com/article/how-to-get-all-the-information-you-need-about-your-linux-machine-with-a-single-command/
-- https://www.tecmint.com/neofetch-shows-linux-system-information-with-logo/
-- https://www.youtube.com/watch?v=bgepGW858fc
-- https://www.linuxuprising.com/2018/05/display-system-information-on-linux.html
-
-
-## Thanks
-
-- [Contributors](https://github.com/dylanaraps/neofetch/contributors)
-- [Packagers](https://github.com/dylanaraps/neofetch/issues/115)
-- [Screenfetch](https://github.com/KittyKatt/screenFetch)
-- [ufetch](https://github.com/jschx/ufetch)
-
-
-## Donate
-
-Donations will allow me to spend more time working on `neofetch`.
-
-If you like `neofetch` and want to give back in some way you can donate here: **https://patreon.com/dyla**

neofetch.1

@@ -1,10 +1,10 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-.TH NEOFETCH "1" "May 2018" "Neofetch 4.0.3" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.48.3.
+.TH NEOFETCH "1" "April 2021" "Neofetch 7.1.0" "User Commands"
 .SH NAME
 Neofetch \- A fast, highly customizable system info script
 .SH SYNOPSIS
 .B neofetch
-\fI\,--option "value" --option "value"\/\fR
+\fI\,func_name --option "value" --option "value"\/\fR
 .SH DESCRIPTION
 Neofetch is a CLI system information tool written in BASH. Neofetch
 displays information about your system next to an image, your OS logo,
@@ -14,6 +14,24 @@ NOTE: Every launch flag has a config option.
 .SH OPTIONS
 .SS "INFO:"
 .TP
+func_name
+Specify a function name (second part of info() from config) to
+quickly display only that function's information.
+.IP
+Example: neofetch uptime \fB\-\-uptime_shorthand\fR tiny
+.IP
+Example: neofetch uptime disk wm memory
+.IP
+This can be used in bars and scripts like so:
+.IP
+memory="$(neofetch memory)"; memory="${memory##*: }"
+.IP
+For multiple outputs at once (each line of info in an array):
+.IP
+IFS=$'\en' read \fB\-d\fR "" \fB\-ra\fR info < <(neofetch memory uptime wm)
+.IP
+info=("${info[@]##*: }")
+.TP
 \fB\-\-disable\fR infoname
 Allows you to disable an info line from appearing
 in the output. 'infoname' is the function name from the
@@ -22,6 +40,12 @@ For example: 'info "Memory" memory' would be '\-\-disable memory'
 .IP
 NOTE: You can supply multiple args. eg. 'neofetch \fB\-\-disable\fR cpu gpu'
 .TP
+\fB\-\-title_fqdn\fR on/off
+Hide/Show Fully Qualified Domain Name in title.
+.TP
+\fB\-\-package_managers\fR on/off
+Hide/Show Package Manager names . (on, tiny, off)
+.TP
 \fB\-\-os_arch\fR on/off
 Hide/Show OS architecture.
 .TP
@@ -59,7 +83,7 @@ NOTE: For FreeBSD and NetBSD\-based systems, you need to enable
 coretemp kernel module. This only supports newer Intel processors.
 .TP
 \fB\-\-distro_shorthand\fR on/off
-Shorten the output of distro (tiny, on, off)
+Shorten the output of distro (on, tiny, off)
 .IP
 NOTE: This option won't work in Windows (Cygwin)
 .TP
@@ -69,7 +93,7 @@ Shorten the output of kernel
 NOTE: This option won't work in BSDs (except PacBSD and PC\-BSD)
 .TP
 \fB\-\-uptime_shorthand\fR on/off
-Shorten the output of uptime (tiny, on, off)
+Shorten the output of uptime (on, tiny, off)
 .TP
 \fB\-\-refresh_rate\fR on/off
 Whether to display the refresh rate of each monitor
@@ -83,6 +107,9 @@ Which GPU to display. (all, dedicated, integrated)
 .IP
 NOTE: This only supports Linux.
 .TP
+\fB\-\-de_version\fR on/off
+Show/Hide Desktop Environment version
+.TP
 \fB\-\-gtk_shorthand\fR on/off
 Shorten output of gtk theme/icons
 .TP
@@ -106,32 +133,43 @@ NOTE: Multiple values can be given. (\fB\-\-disk_show\fR '/' '/dev/sdc1')
 .TP
 \fB\-\-disk_subtitle\fR type
 What information to append to the Disk subtitle.
-Takes: name, mount, dir
+Takes: name, mount, dir, none
 .IP
 \&'name' shows the disk's name (sda1, sda2, etc)
 .IP
 \&'mount' shows the disk's mount point (/, \fI\,/mnt/Local\/\fP Disk, etc)
 .IP
 \&'dir' shows the basename of the disks's path. (/, Local Disk, etc)
+.IP
+\&'none' shows only 'Disk' or the configured title.
+.TP
+\fB\-\-disk_percent\fR on/off
+Hide/Show disk percent.
 .TP
 \fB\-\-ip_host\fR url
 URL to query for public IP
 .TP
+\fB\-\-ip_timeout\fR int
+Public IP timeout (in seconds).
+.TP
+\fB\-\-ip_interface\fR value
+Interface(s) to use for local IP
+.TP
 \fB\-\-song_format\fR format
 Print the song data in a specific format (see config file).
 .TP
 \fB\-\-song_shorthand\fR on/off
 Print the Artist/Album/Title on separate lines.
 .TP
+\fB\-\-memory_percent\fR on/off
+Display memory percentage.
+.TP
+\fB\-\-memory_unit\fR kib/mib/gib
+Memory output unit.
+.TP
 \fB\-\-music_player\fR player\-name
 Manually specify a player to use.
 Available values are listed in the config file
-.TP
-\fB\-\-install_time\fR on/off
-Enable/Disable showing the time in Install Date output.
-.TP
-\fB\-\-install_time_format\fR 12h/24h
-Set time format in Install Date to be 12 hour or 24 hour.
 .SS "TEXT FORMATTING:"
 .TP
 \fB\-\-colors\fR x x x x x x
@@ -146,11 +184,17 @@ Character to use when underlining title
 .TP
 \fB\-\-bold\fR on/off
 Enable/Disable bold text
+.TP
+\fB\-\-separator\fR string
+Changes the default ':' separator to the specified string.
 .SS "COLOR BLOCKS:"
 .TP
 \fB\-\-color_blocks\fR on/off
 Enable/Disable the color blocks
 .TP
+\fB\-\-col_offset\fR auto/num
+Left\-padding of color blocks
+.TP
 \fB\-\-block_width\fR num
 Width of color blocks in spaces
 .TP
@@ -174,10 +218,6 @@ Length in spaces to make the bars.
 Colors to make the bar.
 Set in this order: elapsed, total
 .TP
-\fB\-\-cpu_display\fR mode
-Bar mode.
-Possible values: bar, infobar, barinfo, off
-.TP
 \fB\-\-memory_display\fR mode
 Bar mode.
 Possible values: bar, infobar, barinfo, off
@@ -193,20 +233,28 @@ Possible values: bar, infobar, barinfo, off
 .TP
 \fB\-\-backend\fR backend
 Which image backend to use.
-Possible values: 'ascii', 'caca', 'jp2a', 'iterm2', 'off',
-\&'sixel', 'tycat', 'w3m'
+Possible values: 'ascii', 'caca', 'catimg', 'chafa', 'jp2a',
+\&'iterm2', 'off', 'sixel', 'tycat', 'w3m', 'kitty', 'viu'
 .TP
 \fB\-\-source\fR source
 Which image or ascii file to use.
 Possible values: 'auto', 'ascii', 'wallpaper', '/path/to/img',
-\&'/path/to/ascii', '/path/to/dir/'
+\&'/path/to/ascii', '/path/to/dir/', 'command output' [ascii]
 .TP
 \fB\-\-ascii\fR source
 Shortcut to use 'ascii' backend.
+.IP
+NEW: neofetch \fB\-\-ascii\fR "$(fortune | cowsay \fB\-W\fR 30)"
 .TP
 \fB\-\-caca\fR source
 Shortcut to use 'caca' backend.
 .TP
+\fB\-\-catimg\fR source
+Shortcut to use 'catimg' backend.
+.TP
+\fB\-\-chafa\fR source
+Shortcut to use 'chafa' backend.
+.TP
 \fB\-\-iterm2\fR source
 Shortcut to use 'iterm2' backend.
 .TP
@@ -216,6 +264,9 @@ Shortcut to use 'jp2a' backend.
 \fB\-\-kitty\fR source
 Shortcut to use 'kitty' backend.
 .TP
+\fB\-\-pot\fR source
+Shortcut to use 'pot' backend.
+.TP
 \fB\-\-pixterm\fR source
 Shortcut to use 'pixterm' backend.
 .TP
@@ -231,6 +282,12 @@ Shortcut to use 'tycat' backend.
 \fB\-\-w3m\fR source
 Shortcut to use 'w3m' backend.
 .TP
+\fB\-\-ueberzug\fR source
+Shortcut to use 'ueberzug' backend
+.TP
+\fB\-\-viu\fR source
+Shortcut to use 'viu' backend
+.TP
 \fB\-\-off\fR
 Shortcut to use 'off' backend (Disable ascii art).
 .IP
@@ -243,18 +300,51 @@ Colors to print the ascii art
 .TP
 \fB\-\-ascii_distro\fR distro
 Which Distro's ascii art to print
+.TP
+NOTE: AIX, Hash, Alpine, AlterLinux, Amazon, Anarchy, Android, instantOS,
+Antergos, antiX, "AOSC OS", "AOSC OS/Retro", Apricity, ArchCraft,
+ArcoLinux, ArchBox, ARCHlabs, ArchStrike, XFerience, ArchMerge, Arch,
+Artix, Arya, Bedrock, Bitrig, BlackArch, BLAG, BlankOn, BlueLight,
+bonsai, BSD, BunsenLabs, Calculate, Carbs, CentOS, Chakra, ChaletOS,
+Chapeau, Chrom*, Cleanjaro, ClearOS, Clear_Linux, Clover, Condres,
+Container_Linux, CRUX, Cucumber, dahlia, Debian, Deepin, DesaOS,
+Devuan, DracOS, DarkOs, Itc, DragonFly, Drauger, Elementary,
+EndeavourOS, Endless, EuroLinux, Exherbo, Fedora, Feren, FreeBSD,
+FreeMiNT, Frugalware, Funtoo, GalliumOS, Garuda, Gentoo, Pentoo,
+gNewSense, GNOME, GNU, GoboLinux, Grombyang, Guix, Haiku, Huayra, HydroOS,
+Hyperbola, janus, Kali, KaOS, KDE_neon, Kibojoe, Kogaion, Korora,
+KSLinux, Kubuntu, LEDE, LaxerOS, LibreELEC, LFS, Linux_Lite, LMDE,
+Lubuntu, Lunar, macos, Mageia, MagpieOS, Mandriva, Manjaro, TeArch, Maui,
+Mer, Minix, LinuxMint, Live_Raizo, MX_Linux, Namib, Neptune, NetBSD,
+Netrunner, Nitrux, NixOS, Nurunner, NuTyX, OBRevenge, OpenBSD,
+openEuler, OpenIndiana, openmamba, OpenMandriva, OpenStage, OpenWrt,
+osmc, Oracle, OS Elbrus, PacBSD, Parabola, Pardus, Parrot, Parsix,
+TrueOS, PCLinuxOS, Pengwin, Peppermint, Pisi, popos, Porteus, PostMarketOS,
+Proxmox, Puppy, PureOS, Qubes, Quibian, Radix, Raspbian, Reborn_OS,
+Redstar, Redcore, Redhat, Refracted_Devuan, Regata, Regolith, Rosa,
+sabotage, Sabayon, Sailfish, SalentOS, Scientific, Septor,
+SereneLinux, SharkLinux, Siduction, Slackware, SliTaz, SmartOS,
+Solus, Source_Mage, Sparky, Star, SteamOS, SunOS, openSUSE_Leap,
+t2, openSUSE_Tumbleweed, openSUSE, SwagArch, Tails, Trisquel,
+Ubuntu\-Cinnamon, Ubuntu\-Budgie, Ubuntu\-GNOME, Ubuntu\-MATE,
+Ubuntu\-Studio, Ubuntu, Univention, Venom, Void, VNux, semc, Obarun,
+windows10, Windows7, Xubuntu, Zorin, and IRIX have ascii logos.
 .IP
-NOTE: Arch and Ubuntu have 'old' logo variants.
+NOTE: Arch, Ubuntu, Redhat, Fedora and Dragonfly have 'old' logo variants.
 .IP
-NOTE: Use 'arch_old' or 'ubuntu_old' to use the old logos.
+NOTE: Use '{distro name}_old' to use the old logos.
 .IP
 NOTE: Ubuntu has flavor variants.
 .TP
-NOTE: Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu\-GNOME',
-\&'Ubuntu\-Studio' or 'Ubuntu\-Budgie' to use the flavors.
+NOTE: Change this to Lubuntu, Kubuntu, Xubuntu, Ubuntu\-GNOME,
+Ubuntu\-Studio, Ubuntu\-Mate  or Ubuntu\-Budgie to use the flavors.
 .TP
-NOTE: Alpine, Arch, CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS,
-OpenBSD, and Void have a smaller logo variant.
+NOTE: Arcolinux, Dragonfly, Fedora, Alpine, Arch, Ubuntu,
+CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS, OpenBSD, android,
+Artix, CentOS, Cleanjaro, ElementaryOS, GUIX, Hyperbola,
+Manjaro, MXLinux, NetBSD, Parabola, POP_OS, PureOS,
+Slackware, SunOS, LinuxLite, OpenSUSE, Raspbian,
+postmarketOS, and Void have a smaller logo variant.
 .IP
 NOTE: Use '{distro name}_small' to use the small variants.
 .TP
@@ -263,8 +353,6 @@ Whether or not to bold the ascii logo.
 .TP
 \fB\-L\fR, \fB\-\-logo\fR
 Hide the info text and only show the ascii logo.
-.IP
-Possible values: bar, infobar, barinfo, off
 .SS "IMAGE:"
 .TP
 \fB\-\-loop\fR
@@ -275,6 +363,9 @@ in some terminals emulators when using image mode.
 How to size the image.
 Possible values: auto, 00px, 00%, none
 .TP
+\fB\-\-catimg_size\fR 1/2
+Change the resolution of catimg.
+.TP
 \fB\-\-crop_mode\fR mode
 Which crop mode to use
 Takes the values: normal, fit, fill
@@ -312,6 +403,9 @@ Specify a path to a custom config file
 \fB\-\-config\fR none
 Launch the script without a config file
 .TP
+\fB\-\-no_config\fR
+Don't create the user config file.
+.TP
 \fB\-\-print_config\fR
 Print the default config file to stdout.
 .TP